Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Once again - suggest an RTOS and workbench.

Status
Not open for further replies.

Glide

Newbie level 1
Newbie level 1
Joined
Dec 6, 2004
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
9
I need to choose RTOS for ns5720 or NET+50 NetSilicon processor. The aim - network management and some other processing functions with not hard demands.

As i see, i need RTOS with Ethernet driver, or, may be, i have to write driver, as some else.

I'm ready to buy RTOS, or to use free one. But may be it is more hard to work with free RTOS?

In workbench i need to be more restricted, so i want to use self-made debug cable (Wiggler?) and more cheap software. I want try GNU soft. But may be you will suggest some else, not too expensive?

What can you say about NetSilicon "NET+Works" set from the standpoint of mentioned above? (And what about problems with Big-endian and Little-endian software?)

Thank you in advance.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top