wp100
Advanced Member level 6
- Joined
- May 15, 2009
- Messages
- 3,051
- Helped
- 884
- Reputation
- 1,783
- Reaction score
- 733
- Trophy points
- 113
- Location
- Prime Meridian
- Activity points
- 0
Hi,
Have got one of these little OCXO running at 10Mhz but cannot find any clear info on if its necessary to connect pin 1 , the frequency adjustment, to a voltage or if it will run fine on a default value if just left unconnected ?
( not being 'disciplined' etc )
**broken link removed**
**broken link removed**
Also, when some OCXO devices have a battery powered option, wondered how much difference that can make given todays good regulators ? and also does the battery have to power the OCXO direct or is using a 5v regulator from a 9 or 12v battery defeating the objective ?
Have got one of these little OCXO running at 10Mhz but cannot find any clear info on if its necessary to connect pin 1 , the frequency adjustment, to a voltage or if it will run fine on a default value if just left unconnected ?
( not being 'disciplined' etc )
**broken link removed**
**broken link removed**
Also, when some OCXO devices have a battery powered option, wondered how much difference that can make given todays good regulators ? and also does the battery have to power the OCXO direct or is using a 5v regulator from a 9 or 12v battery defeating the objective ?