Kevinmount
Newbie level 1
Hi - this is my first post on here. Hope you guys are noob friendly!
I want to design and have built a RAM expansion board for the ancient Amiga 1200 home computer.
I want it to be as basic as possible - no RTC support, no FPU, no choice of SIMM size etc.
I simply want the DRAM chips mounted straight onto the board. Probably 4 x 1Mb x 16 fast page DRAM to give 8MB in total.
I never designed a board before, although I do have an electronics background.
I would greatly appreciate any help whatsoever in any aspect of this project.
Thanks in advance.
I want to design and have built a RAM expansion board for the ancient Amiga 1200 home computer.
I want it to be as basic as possible - no RTC support, no FPU, no choice of SIMM size etc.
I simply want the DRAM chips mounted straight onto the board. Probably 4 x 1Mb x 16 fast page DRAM to give 8MB in total.
I never designed a board before, although I do have an electronics background.
I would greatly appreciate any help whatsoever in any aspect of this project.
Thanks in advance.