Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Noob needs help with RAM expansion board.

Status
Not open for further replies.
K

Kevinmount

Newbie level 1
Newbie level 1
Joined
Oct 24, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
Hi - this is my first post on here. Hope you guys are noob friendly!

I want to design and have built a RAM expansion board for the ancient Amiga 1200 home computer.

I want it to be as basic as possible - no RTC support, no FPU, no choice of SIMM size etc.

I simply want the DRAM chips mounted straight onto the board. Probably 4 x 1Mb x 16 fast page DRAM to give 8MB in total.

I never designed a board before, although I do have an electronics background.

I would greatly appreciate any help whatsoever in any aspect of this project.


Thanks in advance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top