Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

non ideal coax cable balun design

Status
Not open for further replies.
X

xtasa

Member level 1
Member level 1
Joined
Jan 14, 2003
Messages
37
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Visit site
Activity points
472
coax cable balun

Hi ,everobody

I have a task to design UHF high power amp. I am using real coax cable as transformer from unbalance line to balance line. Models in ADS and AWR gave me not so good agreement with reality. How to make model of real coax line that will give good agreement with measurements and coax cable length?Model with ferrite is in this frequency range unuseful Please put some useful links,books...for this subject.
In advance thank you very much!!
XTASA
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top