Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

noise summary results display in Cadence Spectre simulation

Status
Not open for further replies.

freewing

Member level 1
Member level 1
Joined
Mar 16, 2005
Messages
35
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,592
cadence noise summary

In the Results Display Window of noise summary in Cadence Spectre simulation, there is a list like the following:
Device Param noise distribution % of total
/M0 id 1e-7 40
/M0 fn 2e-8 8

I want to know what's the meaning of the param. In other word, what kind of noise source do they exactly stand for? I can guess, id might mean channel thermal noise and fn might mean flicker noise. But I want to make sure this and also know the other params. Thank you.
 

noise summary in cadence explanation

fn is the flicker (1/f) noise portion of M0 noise
id is the channel thermal noise portion of M0 noise
 
noise summary in cadence

Thx. What about rs?
/M0 rs 1e-8 0.01
 

heres what i found going through cadence Fourms :

For a MOS transistor, the individual noise contributors are
fn, id, rs and rd.
-fn is the flicker noise
-id is the drain-source resistance thermal noise
-rs is the source parasitic thermal noise
-rd is the drain parasitic resistance thermal noise

For Bipolar transistor,
the noise contributors are in rb, ib, rc, ic, fn, re, and bn.
-rb is the base resistance thermal noise
-ib is the base current shot noise
-rc is the collector resistor thermal noise
-ic is the collector current shot noise
-fn is the flicker noise
-re is the emitter resistor thermal noise
-bn is the burst noise

Also,
-itfz is forward transport current
-ibe(A) Intrinisic B-E Junction Current
-kfn is B-E flicker noise constant
-afn is the B-E flicker niose exponent
-bfn is the B-E flicker noise dependence


I know this is a pretty old thread, but it might help someone later on.
Cheers
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top