No Conductive traces

Status
Not open for further replies.
H

hot_snow

Junior Member level 1
Joined
Mar 23, 2012
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,437
Hello,

While I'm designing a footprint of a sd-card component I found in the datasheet some regions written on it "No Conductive traces". Is this mean that I haven't to route any trace in this region? I'm using Altium, so what's the suitable layer for darwing these regions: Mechanical layer, Keep-out layer...? When I will make the auto-routing is there a configuration in Altium to not route any trace in the "no conductive traces" region?

Thanks
 

Just I want to know what's the suitable layer to draw the "No conductive trace" region? And if there is a configuration in Alitum to avoid routing in this region when I will use the auto-routing option
 

Hi Hot_snow,

Define it as solid region in the top layer and enable it as a keepout(double click on it, you will find option)
Defining it on keepout layer will produce keepouts on all layers.
 
Reactions: FvM

    FvM

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…