henry kissinger
Member level 2
- Joined
- Nov 19, 2021
- Messages
- 44
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 6
- Activity points
- 442
I am plotting the IV characteristics of the NMOS of 2 similar setups.
Here I sweep the Vg from -13 to 13V and vdd from 0 to 50.
note that the only difference is that vdd is positive for one but negative for the other. both grounded at the other end.
But why I am getting 2 different IV characteristic results? should't they be the same? Shouldn't that Id curve should be only related to difference in drain and source voltages when nmos is turned on with same Vg?
Here I sweep the Vg from -13 to 13V and vdd from 0 to 50.
note that the only difference is that vdd is positive for one but negative for the other. both grounded at the other end.
But why I am getting 2 different IV characteristic results? should't they be the same? Shouldn't that Id curve should be only related to difference in drain and source voltages when nmos is turned on with same Vg?