[SOLVED] NMOS Discharging a Capacitor

[batibot323]

Please take a look at this test schematic:


I'm doing DC Analysis on the transistor to the left and transient analysis on the transistor to the right. I have fixed Vg to 1V and varies Vdd from 0 to 1V for DC analysis and used a 1pF capacitor with an initial condition of 1V. Why is it that according to DC analysis, when my VDD is @ 500mV, my Ids should be 100uA but the transient analysis says otherwise? When my Vcap is at 500mV, my Ids is at 50uA. Can someone explain this to me please?

 

[Analog_Domain]

Hi.. Ur graph shows current value is approx equal to 100uA in case of transient... Instead of horizontal marker place vertical marker. It will say the exact current at that instant.


Thanks