HanyHamed
Junior Member level 1
- Joined
- Aug 21, 2015
- Messages
- 18
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 1
- Location
- UAE
- Activity points
- 92
hello,
I am designing the IGBT drive circuit for NPC inverter. in principle, each phase module contains 4 IGBT in series and two clamping Diods. Each pair of IGBT is driven by IR2110 chip. in my design, each chip require 3 power supplies of + 15 volt. I need to review the design with whom can share the knowledge.
Hany
I am designing the IGBT drive circuit for NPC inverter. in principle, each phase module contains 4 IGBT in series and two clamping Diods. Each pair of IGBT is driven by IR2110 chip. in my design, each chip require 3 power supplies of + 15 volt. I need to review the design with whom can share the knowledge.
Hany