Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Network Synthesis Problem using AWR MWO

N

narayani

Full Member level 2
Full Member level 2
Joined
Aug 15, 2014
Messages
133
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,298
Activity points
2,356
While simulating Network Synthesizer using AWR MWO, I am getting following error.
Set of initial search frequencies is not a subset of complete list of frequencies.
Actually I wanted to design input and Output matching circuit using Network Synthesizer. I have changed frequencies from 02. to 0.7 GHz. Even I have changed frequencies from 0.2 to 0.7 GHz where it is required, I am getting this error. How to overcome this problem.
 

Attachments

  • Network_Synthesis_Error.jpg
    Network_Synthesis_Error.jpg
    440.4 KB · Views: 43
  • Network_Synthesis_Error_1.jpg
    Network_Synthesis_Error_1.jpg
    429.2 KB · Views: 51
  • Network_Synthesis_Error_2.jpg
    Network_Synthesis_Error_2.jpg
    457.5 KB · Views: 32

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top