[SOLVED] netlist error .......

[SOWNDHARYA S]

hi ,
i cant able to create netlist and dont know to solve.....
it shows the following error

* Create Netlist
*
********************************************************************************
Netlist Format: LAYOUT

ERROR [MNL0019] 'U3.7' is tied to nets '+5V(1)' and 'BAT PWR CHK'.
ERROR [MNL0019] 'U3.1' is tied to nets 'VSS' and 'MCLR1'.
ERROR [MNL0023] 2 errors found in file.
ERROR [NET0011] Netlist failed or may be unusable.

 

[BabaYaga]

[MNL0019] means
This error message appears when there is a conflict between an existing part reference value for a net with another net. To solve this error, make sure that the part reference value for a net is unique.

If you fix this error then all the errors will vanish.

if possible post your schematic here, i can help you in depth.

connect U3.7, U3.1 to any one net.

 

[kabaleevisu]

which tool r u using

 

[ZASto]

It is obvious that you have 2 net names assigned to the same net(s).
It is more than obvious from the error report that you posted.

 

[SOWNDHARYA S]

thanks to everyone ..i hav cleared netlist error