Negative Resistance Circuit (NRC) for HF

Status
Not open for further replies.

pumanba2

Newbie level 3
Joined
May 17, 2013
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,302
Hi,

Could anybody recommend me some Negative Resistance Circuits (CMOS) for high frequencies applications?

I'm interested in pure negative resistance independent from frequency for a wide band (several GHz).

I would be very thankful!

(except common cross-coupled mos)
 

Could anybody recommend me some Negative Resistance Circuits

Hi
Negative resistance can easily be harvested by oscillators ( positive feedback circuits ) or perhaps via an op amp with some simple additional things .

Best Wishes
Goldsmith
 
(except common cross-coupled mos)
Means what? Negative resistance can be implemented by transistors in a wideband positive feedback structure, needs at least two. So cross coupled transistors would be the straightforward way.

By nature of the involved transistors, the negative resistance won't be a pure real impedance, and due to parasitic elements (e.g. bond wires), you can hardly present a negative resistance with GHz bandwidth off-chip.
 
For "several GHz" ???

Hi Dear LvW

As i can remember about one or two years ago there was a discussion regarding the same issue here , and i remember FvM answered this as using oscillators i told that idea , based on what i saw in that time . so if i'm wrong you correct me please .

Yours Sincerely
Goldsmith

- - - Updated - - -

you can hardly present a negative resistance with GHz bandwidth off-chip.

Hi Dear FvM

What if a Gali-5 be used as a main amplifier which can be used as a wide band amplifier and then adding a positive feedback path ?

Best Regards
Goldsmith
 

Tunnel diodes and Gunn diodes have a negative resistance characteristic and work at microwave frequencies.

Is there any reason you specifically want a CMOS circuit?
 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…