need to transfer component property from Schematic to the PCB File

[emamss]

i need to transfer component property from Schematic to the PCB File this properties named PART_NUMBER i fill it in the Schematic and find it in the pstxprt.dat like the flowing

PART_NAME
C11 'CAP NP_C0805_100NF':
ROOM='MCU';

SECTION_NUMBER 1
'@GHANA 1PH GPRS WIRELESS M-BUS_MAIN .BLOCKDIAGRAM(SCH_1):RS485@GHANA 1PH GPRS WIRELESS M-BUS_MAIN .RS485(SCH_1):INS11988073@DISCRETE.CAP NP.NORMAL(CHIPS)':
C_PATH='@.blockdiagram(sch_1):rs485@.rs485(sch_1):ins11988073@discrete.\cap np.normal\(chips)',
P_PATH='@.blockdiagram(sch_1)age1_rs485@.rs485(sch_1)age6_ins11988073@discrete.\cap np.normal\(chips)',
PART_NUMBER='CS0014',
ROOM='MCU',
PRIM_FILE='.\pstchip.dat',
SECTION='';

PART_NAME
C13 'CAP NP_C0805_1UF_':
ROOM='MCU';

SECTION_NUMBER 1
'@GHANA 1PH GPRS WIRELESS M-BUS_MAIN .BLOCKDIAGRAM(SCH_1):STM8L152C8T0@GHANA 1PH GPRS WIRELESS M-BUS_MAIN .STM8L152C8T6(SCH_1):INS11939270@LIBRARY1.CAP NP.NORMAL(CHIPS)':
C_PATH='@.blockdiagram(sch_1):stm8l152c8t0@.stm8l152c8t6(sch_1):ins11939270@library1.\cap np.normal\(chips)',
P_PATH='@.blockdiagram(sch_1)age1_stm8l152c8t0@.stm8l152c8t6(sch_1)age10_ins11939270@library1.\cap np.normal\(chips)',
PART_NUMBER='CS0119',
ROOM='MCU',
PRIM_FILE='.\pstchip.dat',
SECTION='';
but dont find this value in the Allegro PCB File

 

[rbalaquiao]

If you need to outsourcing this project don't hesitate to message me the rate is very poor. thx.