Hi, need to connect several small board to one power source, what is the best connector to use to connect all the boards in serial to the power supply? I.e., Vcc and GND to board A, then board B, then board C, ...
You can make one more PCB with power connections on it. Each board is connected to one connector on that board, and that board is connected with cable to power supply over connector.
You have lots of connectors in range, but you can base choice on needed current.
You can make one more PCB with power connections on it. Each board is connected to one connector on that board, and that board is connected with cable to power supply over connector.
You have lots of connectors in range, but you can base choice on needed current.