Need specification for this stepper motor (working with RPi or Arduino)

Status
Not open for further replies.
S

sddhrthrt

Newbie level 2
Joined
Apr 25, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
14
We picked up this stepper motor from scrap, and we need to use it to create a robot. But we are not able to work the stepper motor.

I have pictures of the stepper motor opened up:



I know that this is a 48-step motor, it has 5 leads coming out of it. I dont know how to operate the leads - I've tried almost every combination with a stepper motor driver ICL298, but I'm still not able to get it running. For your reference, Here's the label:

 
Last edited by a moderator:

Well, you've ruined the step motor by taking it apart. Manufacturers will tell you to NOT disassemble their motors because they will lose magnetization.
 

barry said:
Well, you've ruined the step motor by taking it apart. Manufacturers will tell you to NOT disassemble their motors because they will lose magnetization.
Click to expand...

It's no problem, I have an identical motor, I need to be sure to drive that.
 

sddhrthrt said:
It's no problem, I have an identical motor, I need to be sure to drive that.
Click to expand...

You SAID you were unable to drive this motor. I explained why it probably doesn't work.

For 5-lead steppers, as far as I know they are all unipolar motors, with the two coils center tap common. That should be pretty easy to determine.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…