Murugesh_89
Full Member level 5
- Joined
- Nov 23, 2012
- Messages
- 266
- Helped
- 7
- Reputation
- 12
- Reaction score
- 6
- Trophy points
- 1,298
- Location
- India
- Activity points
- 3,267
In CCS compiler,
What value should be put in the #use delay (10Mhz or 40Mhz) when using a 10Mhz crystal with PLL enabled to make the frequency to 40Mhz?
Also is it enough to write HS in #fuses or some thing else is required?
Thanks and Regards,
Murugesh
What value should be put in the #use delay (10Mhz or 40Mhz) when using a 10Mhz crystal with PLL enabled to make the frequency to 40Mhz?
Also is it enough to write HS in #fuses or some thing else is required?
Thanks and Regards,
Murugesh