Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need help with a task concering energy and work

Status
Not open for further replies.

chrisstine

Newbie level 3
Newbie level 3
Joined
Apr 15, 2006
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,302
HELP ME!!!

HI GUYS

I AM LEARNING ABOUT ENERGY, WORK, ALL ABOUT CHAPTER 7 IN SERWAY. SO I HAVE THIS EXERCISE THAT I CAN NOT DO. PLS HELP ME. AN ALL ABOUT HOOKE

1-

a mass of 3 kg leaves from the rest and it slides by a slope without friction of 30 degrees, a distance d and makes contact with enemy with means nondeformed of despicable mass. the mass slides 0,35 additional ms when it reaches the rest momentarily and it compresses to the means (500 k = N/m) finds the initial separation between the mass and the means


2-a ball of 0,850 kg ties end of a cord of 1,8 ms of length and it is rotated in I circulate vertical.

during I circulate complete counting from any point, calculates the conducted total work on the ball by:
the tension in the cord? the gravity

repeat the part "to" for the movement throughout the semicircle that goes of beginning at the end of the trajectory.


I HOPE SOMEBODY CAN HELP ME PLS I NEED TO GIVE THIS ON TUESDAY I ALREADY DID 8 BUT THIS ARE THE LAST ONE.

THANKS A LOT.

[/url]
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top