Reply to thread

Hi,

we are planning to use a 5" capacitive touch display with renesas RA8D1 microcontroller. The current version product we completed with an onboard HMI display from Nextion (NX8048P050_011). We are not satisfied with the touch response and display quality, so we are looking for a better display solution.

The RA8 microcontroller has the provision for 2 lane MIPI interface but unfortunately there is no display in the market for 5" 2 lane MIPI interface, so we decided to use ICN6211 MIPI to RGB bridge IC. The screen capture of ICN6211 configurator is attached here.

I need to input the "Basic settings" parameters to get the I2C configuration file. I'm not familiar with the RGB LCD display interface, so please help us to understand the setting for our specific display module.