odongkerz
Newbie level 6
- Joined
- May 8, 2013
- Messages
- 11
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 1,283
- Location
- Indonesia
- Activity points
- 1,374
Hi again.
I found an error again. When i send AT+CSTT="telkomsel","wap","wap123" through hyperterminal, the response from modul GPRS is 'OK'.
But when i send AT+CSTT="telkomsel","wap","wap123" through ATMega128A, 'ERROR' response appeare in LCD 2x16 that i use.
And the compiler is codevision avr 2.05
Here's the code that i wrote
1. When atmega128A send AT, the response is 'OK' in LCD.
2.When atmega128A send ATE0, the response is 'OK' in LCD.
3.When atmega128A send AT+CGATT=1, the response is 'OK' in LCD.
4.When atmega128A send AT+CSTT="telkomsel","wap","wap123", the response is 'ER' in LCD. But i've try send it through hyperterminal and the response is 'OK'
Why the response is 'ERROR'?
putsf("AT+CSTT=\"telkomsel\",\"wap\",\"wap123\"\r"); when i check in hyperterminal, it's correctly wrote like AT+CSTT="telkomsel","wap","wap123"
Thanks anyway
I found an error again. When i send AT+CSTT="telkomsel","wap","wap123" through hyperterminal, the response from modul GPRS is 'OK'.
But when i send AT+CSTT="telkomsel","wap","wap123" through ATMega128A, 'ERROR' response appeare in LCD 2x16 that i use.
And the compiler is codevision avr 2.05
Here's the code that i wrote
Code:
reload:
putsf("AT\r");
wait();
ch[0]=getchar();ch[1]=getchar();
show_lcd();
if(ch[0]=='O' && ch[1]=='K')
{
wait();
putsf("ATE0\r");
wait();
ch[0]=getchar();ch[1]=getchar();
show_lcd();
if(ch[0]=='O' && ch[1]=='K')
{
wait();
putsf("AT+CGATT=1\r");
wait();
ch[0]=getchar();ch[1]=getchar();
show_lcd();
if(ch[0]=='O' && ch[1]=='K')
{
wait();
putsf("AT+CSTT=\"telkomsel\",\"wap\",\"wap123\"\r");
wait();
ch[0]=getchar();ch[1]=getchar();
show_lcd();
while(1);
}
esle goto reload;
}
else goto reload;
}
else goto reload;2.When atmega128A send ATE0, the response is 'OK' in LCD.
3.When atmega128A send AT+CGATT=1, the response is 'OK' in LCD.
4.When atmega128A send AT+CSTT="telkomsel","wap","wap123", the response is 'ER' in LCD. But i've try send it through hyperterminal and the response is 'OK'
Why the response is 'ERROR'?
putsf("AT+CSTT=\"telkomsel\",\"wap\",\"wap123\"\r"); when i check in hyperterminal, it's correctly wrote like AT+CSTT="telkomsel","wap","wap123"
Thanks anyway