Need Help: Phase Firing Angle

Status
Not open for further replies.
D

Don_dody

Full Member level 1
Joined
Nov 4, 2012
Messages
96
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
Indonesia
Visit site
Activity points
1,921
In phase firing angle application, what is actually limited (power, current, or voltage)?

Let say it is used to control a lamp.The theory says, the shorter the firing delay, the brighter the lamp will be. My question, is there any formula or graph to show the relation between firing delay with the phase angle? and also the formula to show how much energy delivered into the lamp with a certain delay/angle.

Thank you.
 

hi,
a semiperiod is from 0 to pi , so you can control a triac or tiristor to switch on by a delay circuit between the limits 0 and pi. For example for no delay on the first semiperiod (the tiristor or triac is conducting from 0 to pi) you have the full energy on the lamp, with a delay of pi/2 you will have only the half of that energy on that semiperiod

zsolt

ps: regarding time & angle ... for 50 Hz ac mains a period is 1/50 = 20 ms, then a semiperiod pi is 10 ms, pi/2 is 5 ms and so on for any value between 0 and pi
 
Last edited:

Thanks for your post.

I understood that principle already, but my problems are clearly stated above. Can you tell me the formula or explanation related to my questions?
 

P = UIcos fi , since a lamp is not reactive element cos fi = 1 because curent is in phase with voltage, so P =UI (efective values) (t) , the energy on a semiperiod is w = ∫ from 0 to pi of P dt, and for any t period w = ∫ from 0 to t of P dt
 
Last edited:

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…