xpress_embedo
Advanced Member level 4
- Joined
- Jul 5, 2011
- Messages
- 1,154
- Helped
- 161
- Reputation
- 396
- Reaction score
- 189
- Trophy points
- 1,353
- Location
- India
- Activity points
- 10,591
Hello!! I successfully transmit data to a TCP server using SIM300 Module using Windows Hyper terminal.
But i have to automate this process.
But not able to write code for it, don't know why i am not able to receive data from GPRS Module properly.
I am using PIC18F8722 Micro-controller and whenever i tries to receive data it Serial Port Over Run Bit OERR gets high.
I am not able to know why this happens.
Can any one share an algorithm to send command to gprs module and based on the received data i can process further.
Please help
But i have to automate this process.
But not able to write code for it, don't know why i am not able to receive data from GPRS Module properly.
I am using PIC18F8722 Micro-controller and whenever i tries to receive data it Serial Port Over Run Bit OERR gets high.
I am not able to know why this happens.
Can any one share an algorithm to send command to gprs module and based on the received data i can process further.
Please help