Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need Help in choosing a right wireless Transceiver module

Status
Not open for further replies.

kavin_eees

Member level 3
Member level 3
Joined
May 11, 2012
Messages
57
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,842
hi all

right now i involved in a project called Overhead tank water management system for a college...
in that college the motor and the tank were situated faraway distances...
i need to choose a right transceiver module for sending and receiving the data ...

kindly suggest me a module for that....
thanks in advance...
 

Hi,

I assume the "tank" side sends its water level....and the pump side is the receiver and decides to switch ON/OFF the pump.

I can't recommend a radio system..

But I recommend to build some fail safe system:
* Maybe the "tank" sends every minute it's level
* if the receiver doesn"t receive the information for several minutes it should start an alarm ...and switch OFF the pump
* to prevent from complete fail of water supply I further recommend to start a "stand alone" backup mode: Maybe run the pump for 10 minutes every hour. (Choose meaningful fix values, or use data from the days before)

Klaus
 

hi klausst
thanks for your reply

the concept is something different,
i that college they are having 4 open well, and 3 to 4 motor in each open well and each motor had connected to 2 to 5 tanks, so we need to make it automated all by using a wireless.
the distance between the well and tank is maximum of 1.5 to 2 kms.
kindly suggest me the suitable one.
 

hi to all

i just searched over the google and found a device from www.cdebyte.com
the device part number is E32-TTL-1W (433T30D)
can i use this module for my new project.
 

nRF24L01 with power amplifier and rubber duek antenna - 1 Km range.

XBee 1 to 2 KM range.
 
hi to all
i planned to choose E32-433T30D from ebyte...
can i use the above mentioned module for my project?

- - - Updated - - -

nRF24L01 with power amplifier and rubber duek antenna - 1 Km range.

XBee 1 to 2 KM range.

hi baileychic

thanks for your reply .
but i need minimum of 2 km coverage.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top