Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need help in ADC Simulation with TINA

Status
Not open for further replies.
T

tsunami_all

Junior Member level 2
Junior Member level 2
Joined
Jul 19, 2019
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
229
Hi,

This graph was generated using ADS8681 EVM board with our front end circuitry (physical board) connected to the board and captured by the ADC GUI software.

image (6).png

I started off by downloading ADS8681 TINA-TI Ref Design on https://www.ti.com/product/ADS8681#product-details

I constructed the schematics of our front end circuitry and have been trying to replicate this same graph on TINA-TI using transient analysis.

So far, I am unable to obtain any graph on TINA close to the one captured on the ADC GUI software.

Is it possible to replicate the graph above on TINA by simulation?

If possible, please assist on the simulation method on TINA.

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top