djnik1362
Full Member level 2
- Joined
- Aug 9, 2010
- Messages
- 136
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 1,298
- Location
- IRAN
- Activity points
- 2,374
hi
I need to know how to start designing a
digital AM receiver. I need a tool to help choose
proper device in chain due to receiver standard
parameters (Frequency, Sensitivity, Dynamic Range, ...).
I don't know how the structure must be and
don't know what devices and ICs may be used.
I have experience in digital and analog. I am
familiar with ADC, FPGA, Microcontrollers, Analog chips and a little RF.
My receiver must be Wide Band with about 600
channels (1 MHz B.W, ) and sensitivity of minimum -94dBm and
good Dynamic Range. Frequency is in the range of
800 MHz ~ 1400 MHz
Thanks for your support.
I need to know how to start designing a
digital AM receiver. I need a tool to help choose
proper device in chain due to receiver standard
parameters (Frequency, Sensitivity, Dynamic Range, ...).
I don't know how the structure must be and
don't know what devices and ICs may be used.
I have experience in digital and analog. I am
familiar with ADC, FPGA, Microcontrollers, Analog chips and a little RF.
My receiver must be Wide Band with about 600
channels (1 MHz B.W, ) and sensitivity of minimum -94dBm and
good Dynamic Range. Frequency is in the range of
800 MHz ~ 1400 MHz
Thanks for your support.