sathiya.ks@tekbridge.in
Newbie level 6
- Joined
- Sep 15, 2010
- Messages
- 12
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 1,283
- Activity points
- 1,389
Hi,
I am searching for an Energy harvesting solution to power my 3.3V, 200mA circuit. I am trying to store the energy from my motor’s shaft current which is driven by a Variable Frequency Drive (VFD).
The specs of the Shaft energy as follows:
1. Current – may go upto 5A
2. Voltage – Normally maintained under 1 volts, but rare occasions it will spike upto 20 V. (mostly rippled AC voltage – can use rectifier circuit to convert to DC)
Kindly suggest me some options if the above method is feasible.
Thanks in advance.
I am searching for an Energy harvesting solution to power my 3.3V, 200mA circuit. I am trying to store the energy from my motor’s shaft current which is driven by a Variable Frequency Drive (VFD).
The specs of the Shaft energy as follows:
1. Current – may go upto 5A
2. Voltage – Normally maintained under 1 volts, but rare occasions it will spike upto 20 V. (mostly rippled AC voltage – can use rectifier circuit to convert to DC)
Kindly suggest me some options if the above method is feasible.
Thanks in advance.