Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

nanowatt switch if possible

Status
Not open for further replies.

ElectronicsRookie

Member level 1
Member level 1
Joined
Oct 22, 2011
Messages
38
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,614
Greetings,
I am looking for equivalent of relay or optocoupler but in nanowatts range if there is any.
I looked into a MOSFET however gate switch cannot be isolated and there is Id drop when conducting. Relay is cool because there is no current drop or voltage drop when switch is on. Timing is in millisecond range.

----- 0000------- switch
0000 ---------000000
---=====----- trigger input

however trigger input has coil which has consumes lots of watts.
Optoisolator has losses in both ways (switch and trigger input).
Voltages are of 0.4V minimum to 2V maximum. Currents are in low mAmps.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top