Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Reply to thread

Message

One can change 40ns to 20ns, 60ns to 40ns and 80ns to 60ns for next 3 signals after first one, but this way although desired waveforms can be achieved, but code is not in harmony with the waveforms. Whatever my code says it should reflect on waveforms, so that reader knows, what will happen at output, just by reading it.

[QUOTE="arifboy, post: 1791108, member: 695315"] One can change 40ns to 20ns, 60ns to 40ns and 80ns to 60ns for next 3 signals after first one, but this way although desired waveforms can be achieved, but code is not in harmony with the waveforms. Whatever my code says it should reflect on waveforms, so that reader knows, what will happen at output, just by reading it. [/QUOTE]

Verification

Welcome to EDAboard.com

Reply to thread

Part and Inventory Search

Connect with us

Online statistics

Forum statistics