Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

msp430f435 with LCD problem

Status
Not open for further replies.
S

sam_manchali

Member level 4
Member level 4
Joined
Jun 14, 2003
Messages
69
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,288
Location
sharjah
Visit site
Activity points
735
msp430f435

hi,
i am driving a static LCD with msp430F435 using the c example with the IAR kick start.
problem: i am not able to display the data continuesly( ie. there is no waveform on the LCD lines )
after it displays the number for 1/2 a sec , then it dissappears and the sq. wave is absent on the pins.but it is present on the COM line. i have made correct connections. :cry:

any suggestions??
thanks in advance
sam
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top