Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

msp430 interfacing with TFT LCD

Status
Not open for further replies.
M

mythreyi

Newbie level 3
Newbie level 3
Joined
Feb 25, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,304
can MSP430 controller interfaced with a TFT LCD??

---------- Post added at 21:06 ---------- Previous post was at 21:04 ----------

And what are the specs that should looked into when TFT LCD is interfaced with a controller?? I am new bie in this..please help..!!!
 

Sure, of course the smaller resolution screens would be preferred, I wouldn't want to run a 19' at 1920x1200 TFT LCD from an MSP430.

A unit with a resolution in the neighborhood of 480x270, the type found in a PDA or Smart Phone, would work fine. Your MSP430 would need the necessary number of Port I/O available to take on the task.

Here are some discussion concerning just such an interface:

**broken link removed**



BigDog
 

Hello!

There is one here, with touch panel. The demonstration runs on MSP430.



Dora

mythreyi said:
can MSP430 controller interfaced with a TFT LCD??

---------- Post added at 21:06 ---------- Previous post was at 21:04 ----------

And what are the specs that should looked into when TFT LCD is interfaced with a controller?? I am new bie in this..please help..!!!
Click to expand...
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top