Jinzpaul4u
Full Member level 4
- Joined
- Feb 1, 2012
- Messages
- 231
- Helped
- 59
- Reputation
- 118
- Reaction score
- 60
- Trophy points
- 1,328
- Location
- India
- Activity points
- 2,822
Hi there,
Greetings,
I have a set PIC18 WIRELESS DEMO KIT (PIC18F46J50) with MRF24J40MA boards. The application is for remotely turn on/off a switch. I am looking for example source code to use as reference. The Microchip demo program (8-bit WDK Demo) is too complex for me to understand. (please excuse me, I am not expert in embedded programming).
I would like to be able to just transmit and receive two numbers and display transmitted and received data on demo board lcd.
I am using Mplab IDE with C18 compiler using C language .
Can something like this be done? Has anyone else done this? Any suggestions are welcome.
Thanks in advance
Greetings,
I have a set PIC18 WIRELESS DEMO KIT (PIC18F46J50) with MRF24J40MA boards. The application is for remotely turn on/off a switch. I am looking for example source code to use as reference. The Microchip demo program (8-bit WDK Demo) is too complex for me to understand. (please excuse me, I am not expert in embedded programming).
I would like to be able to just transmit and receive two numbers and display transmitted and received data on demo board lcd.
I am using Mplab IDE with C18 compiler using C language .
Can something like this be done? Has anyone else done this? Any suggestions are welcome.
Thanks in advance
Last edited: