StoppTidigare
Full Member level 2
- Joined
- Jul 16, 2002
- Messages
- 148
- Helped
- 1
- Reputation
- 2
- Reaction score
- 0
- Trophy points
- 1,296
- Location
- Northern earth
- Activity points
- 1,703
Hi all, I am running a simple programming for tuning on a LED, published in this particular forum.
It works fine, allright. But after I've added a simple "nop". I get a linker error:
" 'org_0' cannot fit the absolute section".
It passes through the assembler but it doesn't pass through the linker! I am using the linker p16f84a.lkr.
Greatful for some help
/StoppTidigare
It works fine, allright. But after I've added a simple "nop". I get a linker error:
" 'org_0' cannot fit the absolute section".
It passes through the assembler but it doesn't pass through the linker! I am using the linker p16f84a.lkr.
Greatful for some help
/StoppTidigare