mplab problem with pic 16f877a

Warning [107] C:\Users\SILE1411\Desktop\HR\Untitled.c; 2.7 illegal # directive "device"
Warning [107] C:\Users\SILE1411\Desktop\HR\Untitled.c; 4.6 illegal # directive "FUSES"
Warning [107] C:\Users\SILE1411\Desktop\HR\Untitled.c; 5.6 illegal # directive "FUSES"
Warning [107] C:\Users\SILE1411\Desktop\HR\Untitled.c; 6.6 illegal # directive "FUSES"
Warning [107] C:\Users\SILE1411\Desktop\HR\Untitled.c; 7.6 illegal # directive "FUSES"
Warning [107] C:\Users\SILE1411\Desktop\HR\Untitled.c; 8.6 illegal # directive "FUSES"
Warning [107] C:\Users\SILE1411\Desktop\HR\Untitled.c; 9.6 illegal # directive "FUSES"
Warning [107] C:\Users\SILE1411\Desktop\HR\Untitled.c; 10.6 illegal # directive "FUSES"
Warning [107] C:\Users\SILE1411\Desktop\HR\Untitled.c; 11.6 illegal # directive "FUSES"
Warning [107] C:\Users\SILE1411\Desktop\HR\Untitled.c; 12.6 illegal # directive "FUSES"
Warning [107] C:\Users\SILE1411\Desktop\HR\Untitled.c; 14.4 illegal # directive "use"
Warning [107] C:\Users\SILE1411\Desktop\HR\Untitled.c; 15.4 illegal # directive "use"
Error [141] C:\Users\SILE1411\Desktop\HR\Untitled.c; 18.16 can't open include file "lcd.c": No such file or directory

********** Build failed! **********

Click to expand...

#include <htc.h>
#device adc=8

#FUSES NOWDT                    //No Watch Dog Timer
#FUSES HS                       //High speed Osc (> 4mhz for PCM/PCH) (>10mhz for PCD)
#FUSES NOPUT                    //No Power Up Timer
#FUSES NOPROTECT                //Code not protected from reading
#FUSES NODEBUG                  //No Debug mode for ICD
#FUSES NOBROWNOUT               //No brownout reset
#FUSES NOLVP                    //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O
#FUSES NOCPD                    //No EE protection
#FUSES NOWRT                    //Program memory not write protected

#use delay(clock=20000000)
#use rs232(baud=9600,parity=N,xmit=PIN_C6,rcv=PIN_C7,bits=8)


#include <lcd.c>
int x=0,bpm;
void main()
{
   lcd_init();
lcd_gotoxy(1,1);
 lcd_putc("start");
  lcd_gotoxy(1,2);
  lcd_putc("tmr set");
  delay_ms(2900);
  setup_timer_0( RTCC_EXT_L_TO_H);
  set_timer0(0);
  delay_ms(5000);
  
  lcd_putc("\f");
  lcd_gotoxy(1,1);
   lcd_putc("dlay cmpt");
  x=get_timer0();
  lcd_gotoxy(1,2);
   lcd_putc("timer read");
   lcd_gotoxy(1,1);
  printf(lcd_putc,"val%d",x);
 bpm=x*24;
  lcd_putc("\f");
   printf(lcd_putc,"bpm%d",bpm);

   // TODO: USER CODE!!