Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[Moved] Using PPP with i2c device ?

Status
Not open for further replies.
S

Steider

Newbie level 3
Newbie level 3
Joined
Mar 11, 2014
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
30
Hi,

I'm using pppd without any problem with a serial interface like ttyS0, ttyRPC0 or ttyAMA0, etc...
I'm using a raspberry with two i2c devices : i2c-0 and i2c-1.

Now, i would like to connect my modem on an i2c device at a specific address. For example : i would like to use the 0x28 i2c address on i2c-1 device.

My question is how to specify to pppd that i want to use this one ?

Regards,
Steider
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top