[Moved]: un*cox for nmos3v in TSMC
- Thread starter rey1991
- Start date
- Status
Re: un*cox for nmos3v in TSMC
You can calculate it from an Ids current measurement in strong inversion and linear region from this equation:
\[I_{ds} = \frac {(\mu_n \cdot \, cox)}{2n} \cdot \, \frac {W}{L} \cdot \, (V_{gs}-V_{th})^2\]
For the substrate factor use n=1.35 ; Vgs is the necessary gate-source voltage for Ids , Vth is the threshold voltage.
You can calculate it from an Ids current measurement in strong inversion and linear region from this equation:
\[I_{ds} = \frac {(\mu_n \cdot \, cox)}{2n} \cdot \, \frac {W}{L} \cdot \, (V_{gs}-V_{th})^2\]
For the substrate factor use n=1.35 ; Vgs is the necessary gate-source voltage for Ids , Vth is the threshold voltage.
- Status
Similar threads
-
-
-
-
[moved] Voltage Considerations for Diode Selection
- Started by suvsystemltd
- Replies: 1
-