[Moved]: Sg3525 pwm changeover problem with ups

Status
Not open for further replies.
F

fazalahad

Newbie level 3
Joined
Feb 5, 2013
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,299
helo tahmed Salam
l have the same problem ( Sg3525 pwm problem and changeover problem)i have made a ups it warks fine but when electricity fails from grade it not starts quickly and so computer reboots.
i have remove the capacitor from softstart pin 8/ decrease the value of resistor which conect from pin 5to7. but no improvement.
please help me.
 

fazalahad said:
i have remove the capacitor from softstart pin 8/ decrease the value of resistor which conect from pin 5to7. but no improvement.
please help me.
Click to expand...

Donot remove softstarting cap, you may use minimum value of capacitor to reduce the soft starting time. Check your switching circuit on transformer side, I am asking tab changing relay. I think u have some problem on switching side.
 

Thanks alot.
but ihave changed relay twice and i m sure tht is not the fault of relay .
 

fazalahad said:
Thanks alot.
but ihave changed relay twice and i m sure tht is not the fault of relay .
Click to expand...

Sorry for late reply, I did not asked to replace the Relay, you may check the Relay switching circuit and probably sensing circuit which sense and switches the Relay.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…