[Moved]: plotting region of operation in virtuoso 6.1.6

Status
Not open for further replies.
V

viperpaki007

Full Member level 5
Joined
Jul 2, 2008
Messages
274
Helped
11
Reputation
22
Reaction score
8
Trophy points
1,298
Location
Finland
Visit site
Activity points
3,437
Hi,

In previous versions of cadence virtuoso, i used to plot the transistor region of operation from edit> component display. Now in the newer version 6.1.6, i cannot find this option anymore. Can anybody tell how i can annotate transistor regions of operation.

Regards
 

Re: plotting region of operation in virtuoso 6.1.6

Hi you can see it from DC operating points table from the toolbar on the schematic screen or you can use calculator and use "op" then choose the device you want to know the region.

thanks
 
Re: plotting region of operation in virtuoso 6.1.6

kenambo said:
Hi you can see it from DC operating points table from the toolbar on the schematic screen or you can use calculator and use "op" then choose the device you want to know the region.

thanks
Click to expand...

Hi I still can't find any option in to toolbar or in the 'op' function which can be used in the older version. Could you be a little bit more specific about it? Thanks.
 

Re: plotting region of operation in virtuoso 6.1.6

XKEPHY said:
Hi I still can't find any option in to toolbar or in the 'op' function which can be used in the older version. Could you be a little bit more specific about it? Thanks.
Click to expand...

Hi

Have you tried the calculator you can find it there.

or use this function

OP("instance name","region")

for example if you have MN1 as your instance name of the MOS then you have to use

OP("/MN6","region")

thanks
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…