Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[Moved] Please HELP me Guys how to convert rain exceeded time to Rainfall rate

Status
Not open for further replies.

other-side-of-d-moon

Advanced Member level 4
Full Member level 1
Joined
Oct 18, 2010
Messages
100
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Activity points
1,961
Hi bro's, please help me

i attached this photo to check it. see the selected point 8.7780 for 1% exceeded of time. how can i get the rainfall rate mm/hr.

tq
rain fall rate1.jpg
 
Last edited:

Re: Please HELP me Guys how to convert rain exceeded time to Rainfall rate

The chart is saying that 1% of the time the rainfall rate exceeds 8.778 mm/hr.

This location gets alot of rainfall, generally rains over 50 mm/hr are considered very heavy (torrential) storms.
 

Re: Please HELP me Guys how to convert rain exceeded time to Rainfall rate

that is correct But how could i get the value of 0.0001 % of the time.

please help
 

Re: Please HELP me Guys how to convert rain exceeded time to Rainfall rate

Your chart goes up to 0.001%.

0.0001% of a year is approximately 30 seconds.

Usually these charts are used to estimate fade margins or availability over the course of a year. It's generally understood that these are estimates, and +-30 seconds over the course of an entire year seems like it would be in the noise. Is there a reason why you need such precise numbers?
 
Re: Please HELP me Guys how to convert rain exceeded time to Rainfall rate

All i need is how to convert from 500 mm/24hour to get the time exceeded 0.01% of the time in mm/hr.
 

Re: Please HELP me Guys how to convert rain exceeded time to Rainfall rate

All i need is how to convert from 500 mm/24hour to get the time exceeded 0.01% of the time in mm/hr.

There's not enough information to do that. The 500 mm could be a gentle rain all day, or a thunderstorm for a couple hours or any combination of the two. The chart in your first post has the rain rate information though, is this for a different problem?
 
Re: Please HELP me Guys how to convert rain exceeded time to Rainfall rate

There's not enough information to do that. The 500 mm could be a gentle rain all day, or a thunderstorm for a couple hours or any combination of the two. The chart in your first post has the rain rate information though, is this for a different problem?

Tnx pstuckey..

what should i do to convert 500 mm/hr to get 0.01%.

what is the parameters should be given to conver it?? is there such a formula to do so ??

tq
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top