Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[MOVED] making pcbs etchingss

Status
Not open for further replies.
E

ean1

Newbie level 3
Newbie level 3
Joined
Jun 23, 2013
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
lincolnshire
Activity points
25
hi again. i,m at the stage to make my pcb's.
the pcb has large areas of un etched copper. could i use a permanent marker for the larger areas and clean off after etching
 

Yes you can.

- - - Updated - - -

You can also use a LaserJet printer for this purpose. Using toner transfer.

- - - Updated - - -

Search in Google "toner transfer" .
 
  • Like
Reactions: ean1

    E

    ean1

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top