[MOVED] L298n output problem

Status
Not open for further replies.
G

Ghosh Debalina

Newbie level 5
Joined
Mar 6, 2014
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
60
Hi all , I am using l298n to drove sma actuator. I am giving 9 volt to pin 4 and 5 volt pin 9.I am getting 8.5 volt from output pin 2 ,3.5 volt from output pin 3 and nothing from output pin 10 and 12. I have connected current sense pin 1 and 15 th to grnd.but hten also i am not getting proper output voltage:bang:
please help.
 

Re: L298n output problem

Hi,

Have you followed the L298 datasheet ?

Pins 10 and 12 are Inputs ...?

How have you got the Enabled pins connected ?

Showing your circuit might help.
 

While attaching supply to the pin no 4 . you must connect a capacitor electrolytic type around 470 uF. then see the changes
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…