[Moved] KiCad/CvPcb FootPrint problemm

Status
Not open for further replies.
A

anis25

Newbie level 2
Joined
Aug 4, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
9
Hi
i have a little problemme in KiCad when i use CvPcb
i can't fine a 8pin-1row header footprint only 8pin-2row
 

It's easy to make your own.
1. Open the footprint editor, select a similar part, for example the 8x2 header.
2. delete the row you dont want.
3. check the pin numbers are still in sequence, you can edit them if not.
4. move the outline edges to their new position
5. change the library to one of your own so you can keep it if you reinstall Kicad
6. save the part under an new name.

With a bit of practice you will find it very easy to create or edit parts in Kicad.

Brian.
 
Reactions: anis25

    A

    anis25

    Points: 2
    Helpful Answer Positive Rating
Helo
thank's a lot that work perfetly :grin:
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…