[SOLVED] [MOVED] How to join 2 sheets in altium ?

Status
Not open for further replies.
B

bianchi77

Advanced Member level 4
Joined
Jun 11, 2009
Messages
1,313
Helped
21
Reputation
44
Reaction score
20
Trophy points
1,318
Location
California
Activity points
9,442
Hello guys,

Does anyone know on how to connect a net in two sheets in altium,
any information will be appreciated,
Please have a look at the screenshot..

thank you


 
Last edited:

Re: How to join 2 sheets in altium ?

through an "off-sheet" connector!!!
goto place--->off sheet connector
 

Re: How to join 2 sheets in altium ?

It won't draw a net - just give them the same name so they are electrically connected. Check the netlist if you want to be sure.

Keith
 

Re: How to join 2 sheets in altium ?

I upload the project please have a look and see what I should do,
thanks
 
Last edited:

I put 2 off sheet, please have a look on the screen shot...



- - - Updated - - -

I didn't see it's connected on the netlist


- - - Updated - - -

Pin 17 U5 ( first sheet ) should connect to pin 2 R1 ( second sheet ),
but it's not....anyone can help ? thanks
 

i don't think the "out" connector of 89c51 is properly connected check its connection, it should show red cross before getting connected!!! moreover did you run your error check before moving on to pcb layout?? error will be shown if the pin is floating!!!
also put a net label on both the output wire of 89c51 and U4 to see in layout where is that particular net!!!
 

do you mean like this ? :

How can I run error check ?
thanks
 

yes like that.
compile the project it will give you error report at the end of compilation.
It shouldn't be a big issue anyhow...have a look :
**broken link removed**
 

smoothcriminal said:
yes like that.
compile the project it will give you error report at the end of compilation.
It shouldn't be a big issue anyhow...have a look :
**broken link removed**
Click to expand...
Thank you very much for the link, I'll see what I can fix and get back to you..

- - - Updated - - -

Still there's no connection on PCB,
Is it right ?
Please have a look :


When I imported the net for PCB, these connection didn't appear...

- - - Updated - - -

Pin 17 from U5 should be connected to Pin 2 R1
but there's no connection in PCB, I have no idea since I follow the suggestion already, did I miss something here ? or altium has a bug ?
 

I created my own library but can not connect the pin, why is that ?

- - - Updated - - -

I miss connect between wire and component, now it works....thanks a lot guys

- - - Updated - - -

The solution is, put the right wire into the right component point...
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…