Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[Moved] Free Electron Pump Circuit

Status
Not open for further replies.
Ah, nope!

Your foil is acting as one plate of a capacitor, with the other one formed by the electronics and its power wiring, there is no magic here.
As you change the capacitive loading the impedance reflected into the transformers primary changes which changes the required supply current and circuit efficiency, but in no case do you get even close to 100%, never mind exceeding it!

It might pay for you to learn some proper measurement methodology (how to measure the power OUTPUT of your arrangement would be a good start, for all that that is a bit non trivial with your setup).

Everyone tries coupling a motor and a generator (effectively your light tube and solar cell), most of us did it sometime around the age of 8 or so, you get over the disappointment eventually.

Regards, Dan.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top