[Moved] Failed to get CPU status after 4 retries

DLL version V4.94g, compiled Nov 21 2014 10:19:50
Firmware: J-Link ARM V8 compiled Sep 22 2014 23:26:43
Hardware: V8.00
S/N: 99991999
Feature(s): RDI,FlashDL,FlashBP,JFlash,GDBFULL
VTarget = 2.957V
Info: TotalIRLen = ?, IRPrint = 0x..FFFFFFFFFFFFFFF300000001
Info: TotalIRLen = ?, IRPrint = 0x..FE0A4A0000003278F8787800
No devices found on JTAG chain. Trying to find device on SWD.


WARNING: RESET (pin 15) high, but should be low. Please check target hardware.


WARNING: RESET (pin 15) high, but should be low. Please check target hardware.
No device found on SWD.
Failed to identify target. Trying again with slow (4 kHz) speed.
Info: TotalIRLen = ?, IRPrint = 0x..000000000000000000000000
Info: TotalIRLen = ?, IRPrint = 0x..FFFFFC2525C0031F07F0783F
No devices found on JTAG chain. Trying to find device on SWD.


WARNING: RESET (pin 15) high, but should be low. Please check target hardware.


WARNING: RESET (pin 15) high, but should be low. Please check target hardware.
No device found on SWD.
No device found at all. Selecting JTAG as default target interface.

Click to expand...