e.mfr
Newbie level 5
- Joined
- Sep 7, 2005
- Messages
- 10
- Helped
- 3
- Reputation
- 6
- Reaction score
- 1
- Trophy points
- 1,283
- Location
- world of electronic
- Activity points
- 1,373
in optomechanical mice we have 3 kind of inputs:
1-switch inputs
2-x direction optical sensors
3-y direction optical sensors
4 optical sensor are connected to 4 pin of mouse IC.
I opend an old mouse & see 2 output of this sensors
are connected to each other with 2 different resistor
(3.3K & 1M) & finally connect to 7pin of com1.
can I take it as a reason that this 2 output make
a weighted or?
did com1 design with MVL technology?
thanks all for help
1-switch inputs
2-x direction optical sensors
3-y direction optical sensors
4 optical sensor are connected to 4 pin of mouse IC.
I opend an old mouse & see 2 output of this sensors
are connected to each other with 2 different resistor
(3.3K & 1M) & finally connect to 7pin of com1.
can I take it as a reason that this 2 output make
a weighted or?
did com1 design with MVL technology?
thanks all for help