motor rotation proble

Status
Not open for further replies.
A

A.N.O

Newbie level 5
Joined
Mar 20, 2013
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,333
hi
I have problem in motor,its rotation is slower than before.
Its starting method is star delta and it is slow in both of them
can any one help me???
I want to know the problem is in power circuit or in the motor itself ?
thanks advance
 

How are you driving them? Hbridge? by pulse or what? Check the voltage across the motor, remove them and test them outside to see that they are ok. Are the dc motors or ac? brush or brushless? or stepper? Give some more information as to the type of motors the circuitry around them etc.

A.N.O said:
hi
I have problem in motor,its rotation is slower than before.
Its starting method is star delta and it is slow in both of them
can any one help me???
I want to know the problem is in power circuit or in the motor itself ?
thanks advance
Click to expand...
 

the motor is AC ,3-phase motor
I check the voltage between its pole it was 380
 

You mentioned star/delta starting so you don't use a VFD. The RPM is determined by the mains frequency, number of poles and the load (assuming an induction motor).

If you did not change anything there must be increased load or a malfunction in the motor. When RPM reduces significantly, the motor current would increase (more then factor 2), resulting in smoke, blowing a fuse, damage, etc

Did you actually measure the motor speed (at the motor shaft) and determined the slip?
 
Reactions: burt007

    burt007

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…