henwyboi
Newbie level 1
- Joined
- Dec 16, 2013
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 8
Good Day!!
I'm having a problem writing a code for my project. You see, the MCU will use the TXRX as well as two pins from port A as an input. The input in the TXRX will come from a VR module (https://www.elechouse.com/elechouse...ucts_id=2151&zenid=1havtg3pntnpjmrp4lfso4jci3). And as for the two pins, they'll come from an IS471 based proximity sensor. I'll upload pictures to help!!
Schematic Diagram
I/O Parameters
Thanks in advanced
I'm having a problem writing a code for my project. You see, the MCU will use the TXRX as well as two pins from port A as an input. The input in the TXRX will come from a VR module (https://www.elechouse.com/elechouse...ucts_id=2151&zenid=1havtg3pntnpjmrp4lfso4jci3). And as for the two pins, they'll come from an IS471 based proximity sensor. I'll upload pictures to help!!
Schematic Diagram
I/O Parameters
Thanks in advanced