Reply to thread

Message

The problem from burnout is inadequate cooling when overloaded with current, or lack of OTP or OCP protection from loads with 10x large surges like tungsten lamps and motors starting on full voltage.

[ATTACH=full]193284[/ATTACH]

However, your problem is a lack of drive voltage for switching to get low Rce ( or low RdsOn in FETs) due to capacitance loading.

[QUOTE="D.A.(Tony)Stewart, post: 1779393, member: 134022"] The problem from burnout is inadequate cooling when overloaded with current, or lack of OTP or OCP protection from loads with 10x large surges like tungsten lamps and motors starting on full voltage. [ATTACH type="full" alt="1724437551318.png"]193284[/ATTACH] However, your problem is a lack of drive voltage for switching to get low Rce ( or low RdsOn in FETs) due to capacitance loading. [/QUOTE]

Verification

Part and Inventory Search

Analog Design
Analog Circuit Design
Mosfet driver

Welcome to EDAboard.com

Reply to thread

Part and Inventory Search

Connect with us

Online statistics

Forum statistics