mosfet driver buffer with jfet

Status
Not open for further replies.
R

roboman

Newbie level 5
Joined
Jan 12, 2015
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
60
i want to drive 10 irfp460 mosfet that parallel and using ir2110 to drive them.but ir2110 cant.can i use bjt totem pole or i Must use jfet totem pole to driving mosfet?

the Threshold Voltage of irfp460 is 4 volt and I'm afraid to use bjt totem pole when driver voltage below 4 volt and in this area Linear acts



Can someone help me?
 

Using a complementary BJT voltage follower raises respectively reduces low and high level by about 0.7 V which involves no problem with standard MOSFETs.
 

FvM said:
Using a complementary BJT voltage follower raises respectively reduces low and high level by about 0.7 V which involves no problem with standard MOSFETs.
Click to expand...

max gate current is 30 ampere i 245 ns.whats your opinion about use bd140 and bd139 ?
 

BD139/BD140 hasn't good current gain at high currents. Commercial gate drivers are often using audio transistors in the 6 - 10 A range, e.g. MJD44/45. You get also 10 A capable cp,plementary transistors in SOT23 package from Diodes.

These small transistors are particularly suitable if you want to provide individual boosters for each output transistor or a group of transistors.
 

    V

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…