Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

MOSFET Driver as LVTTL to CMOS converter, line driver

Status
Not open for further replies.
A

agdepus

Newbie level 2
Newbie level 2
Joined
Jul 21, 2008
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,293
Hi,
I have to come up with a faster 3.3V to 5/15V conversion then we have today.
We are using a MC14504 for conversion and then buffers the signals using a BUF634U.

I could use a dual fet FET config, but then I looked into the different MOSFEt drivers on the market.
1, Are there any reason at all not for these small and cheap circuits to do the job?

2, Has anybody used these drivers to drive pulsed signals into long(100 to 300m) coaxial strecthes, terminated into 50 ohms?

The circuit in question is the UCC37324D.
Thanks,
Apus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top